The installer is not able to find the “default” path to the ELITE installation routine. This path will vary by product. The default path is described below for the appropriate product. Path Location will always be “C” drive: Core: C:\ELITE\Core PREMIUM: C:\ELITE\PREMIUM PCATD: C:\ELITE\PCATD BATD: C:\ELITE\BATD
After the ELITE hardware driver has been installed, the menu does not appear in Prepar3D
The original problem is simply a software module (sim connect) that has NOT been installed by your download of Prepar3d. In 95% of cases this is a non issue, but if you are reading this then it means you are the 5% of missing sim connect. After your ELITE driver […]
Did you know that ELITE had this item in their product line?
DA40/42 This device has been manufactured from a joint venture between Diamond Aircraft and Elite Simulation Solutions in 2005. Avionics Garmin G1000 Glass Cockpit GDU1040 PFD GDU 1042 MFD GMA1347 Audio Panel AutopilotBendix KingAir KAP140 Qualification Qualification level & qualifying authority FAA FTD Level 5 FNPT II Status Deactivated - [...]
PHS Moorabbin Installation photos
Installation photos of the PHS Moorabbin installation of the Airbus AS-355 simulator.
How to Turn On or Off “USB Selective Suspend” for Idle USB Devices?
Open the Windows Control panel, and click on Power Options. 2. Open the change plan settings for your selected power plan. 3. Open the advanced power settings for your selected power plan. 4. Expand USB settings and USB selective suspend setting, set the drop down menu setting to […]
Windows 8 and 10 Compatibility
ELITE software is not compatible with Windows 8 or Windows 10 operating systems. Our developers are working on a solution but at this time we do not provide support for Windows 8 or 10 users.
My active ILS is not working
You must DESELECT the ILS you do not wish to use. To do this you must be in the MAP mode, push the ALT key and the letter J at the same time. Place the + over the orange dot on the ILS antenna to deselect and LEFT click. To […]
How do I calibrate my flight controls?
Calibration of your flight control devices in ELITE is necessary to bring them proper tolerances and allow the software to learn the control nuances or limits of the specific devices being used. (Please note that gaming controllers must first be calibrated in Windows, through the Control Panel.) To calibrate your […]
How do I remove the map screen from atop the on-screen avionics panel?
When you select the configuration screen and look on the external avionics tab, select the “non-digital avionics” option. Then press and hold the SAVE button above to save this change and restart the program. The next time you start the ELITE software, you will see the avionics displayed on the […]
I have an AP3000 avionics stack with the ELITE GNS 430 control module. Why is my #1 NAV/COM inoperative?
When you are using an aircraft module with the GNS 430 WAAS simulation, the ELITE 430 WAAS control module becomes COM1/NAV1. Therefore, the #1 COM/NAV module on the AP3000 becomes inoperative, as this role is now being fulfilled by the GNS 430 WAAS.