Calibration of your flight control devices in ELITE is necessary to bring them proper tolerances and allow the software to learn the control nuances or limits of the specific devices being used. (Please note that gaming controllers must first be calibrated in Windows, through the Control Panel.) To calibrate your…
This error message indicates that the DLL file in the software for ELITE USB hardware support was not installed. To correct the problem, insert the ELITE DVD or media usb card in your computer, and run the installer again, while remembering to select one of the options for ELITE-brand USB…
We currently do not have new hardware drivers for ELITE hardware in Prepar3D version 3. Our developers our working on them as quickly as possible. As soon as the drivers are available they will be posted on our website. Thank you for your understanding.
In order to better serve our customers, we are pleased to announce we will now have two ELITE websites, one for sales and a separate one for customer support. We have so much information to share with our current and potential customers that we feel having two websites will get…
Once you start ELITE select your aircraft and area. (Assuming you have purchased the IPM add on) from the Configuration screen you will see a new button called GPS. Once you click this button and select the correct COM port/speed. Choose AV400 for GPS Out & Protocol and Baud Rate…
Once you start X-plane in the Joystick/Equipment menu you must select your com port (Garmin section) and check the box (see image below). From the tools menu in the GPS, you MUST change the serial data interface mode to “Aviation In.” Without this setting, the GPS will not connect. This menu…
After the successful installation of FSUIPC you must register (paid) in order for this function to be present. If you go to the addon/FSUIPC menu (see image below). Then click the GPS out tab, check the enable box- then select your com port. We recommend using 9600 port speed and…
Start ELITE Select the aircraft Select the area Right click on the instrument panel and load the map page (ALT+M) On the right hand side of the screen select “REPOS” Select the desired runway Press “set as default” button When selecting that previously selected database that…
